Elevator buckets are available in standard executions or custom made, with back wall reinforcing strips (type L), reinforcing back wall plate (type M) or side wall reinforcing strips (type N). High capacity buckets increase the throughput considerably with minimal changes to the foot print of the elevator. For handling compacting material or large stones we recommend to add ripping teeth to the front of 5-10% of the buckets in order to reduce scooping forces and to minimise the risk of the tension device lifting and thus prevent loose chains and chain slip. Stiffeners inside the buckets recommended for bucket width >/= 800mm

  • elevator buckets to DIN standard of custom made
  • manufactured in a wide range of materials, surface coating or rubber inserts
  • buckets available for all fastening types

bucket elevator with back-wall fastening (centrifugal discharge)


Copyright (c) 2009 HEKO Ketten GmbH
Imprint Data protection declaration
Select language